Assembler III
Muncie, IN
Updated: May 22
Following written and visual instructions, Assemblers use electrical and mechanical knowledge and skills to assemble locomotive parts and components. Operations include wiring, mechanical assembly, fabricating, and repair work. - Run wiring throughout cab unit and underframe;
- Measure, cut, and lug wires to proper length;
- Evaluate continuity of wires and cables;
- Fit, assemble, connect and install system components;
- Use stripping and crimping pliers, voltmeters, jigs, measurement instruments, hand and power tools;
- Align major components;
- Assist welders with prep, repair, and grinding weld spatter;
- Mask locomotives for paint;
- Utilize computer to access instructional documents.
Essential and Physical Activities:
- Strength – Must be able to lift and carry up to 35lbs, push and pull up to 50lb;
- Motion – Constant walking Frequent and sustained bending, crouching, stopping, kneeing, squatting and overhead reaching and climbing ladders;
- Vision/Hearing Requirements – Must be able to follow written and verbal instructions and hear audible alarms;
- Work Environment – Works on varied surfaces, concrete floors, and gravel, rail car and locomotive floors. Works at varied heights from floor level to tops of locomotives. Work in confined spaces. Non-temperature control environment, all weather conditions with high noise and high dust levels;
- Emotional Demands – Due to the working environment, noise, dust, personal protective equipment, employee must be comfortable working alone;
- Safety – Safety Sensitive positions because it works in and around active tracks, rail cars, locomotives, and other moving equipment. Employee must abide by all safety protocols, health/medical screenings and utilize all required PPE. Included but not limited to metatarsal boots, safety glasses, gloves, respirators, aprons, ear protection, etc. - High School Diploma or equivalent required. - Ability to read and interpret schematics, wire running lists, blueprints;
- Ability to use various hand and power tools and measuring devices;
- Ability to work in a Windows environment to look up assembly instructions/reference documents;
- Safety- and quality-focused;
- Continuous improvement-oriented.
- Measure, cut, and lug wires to proper length;
- Evaluate continuity of wires and cables;
- Fit, assemble, connect and install system components;
- Use stripping and crimping pliers, voltmeters, jigs, measurement instruments, hand and power tools;
- Align major components;
- Assist welders with prep, repair, and grinding weld spatter;
- Mask locomotives for paint;
- Utilize computer to access instructional documents.
Essential and Physical Activities:
- Strength – Must be able to lift and carry up to 35lbs, push and pull up to 50lb;
- Motion – Constant walking Frequent and sustained bending, crouching, stopping, kneeing, squatting and overhead reaching and climbing ladders;
- Vision/Hearing Requirements – Must be able to follow written and verbal instructions and hear audible alarms;
- Work Environment – Works on varied surfaces, concrete floors, and gravel, rail car and locomotive floors. Works at varied heights from floor level to tops of locomotives. Work in confined spaces. Non-temperature control environment, all weather conditions with high noise and high dust levels;
- Emotional Demands – Due to the working environment, noise, dust, personal protective equipment, employee must be comfortable working alone;
- Safety – Safety Sensitive positions because it works in and around active tracks, rail cars, locomotives, and other moving equipment. Employee must abide by all safety protocols, health/medical screenings and utilize all required PPE. Included but not limited to metatarsal boots, safety glasses, gloves, respirators, aprons, ear protection, etc. - High School Diploma or equivalent required. - Ability to read and interpret schematics, wire running lists, blueprints;
- Ability to use various hand and power tools and measuring devices;
- Ability to work in a Windows environment to look up assembly instructions/reference documents;
- Safety- and quality-focused;
- Continuous improvement-oriented.
Following written and visual instructions, Assemblers use electrical and mechanical knowledge and skills to assemble locomotive parts and components. Operations include wiring, mechanical assembly, fabricating, and repair work. - Run wiring throughout cab unit and underframe; - Measure, cut, and lug wires to proper length; - Evaluate continuity of wires and cables; - Fit, assemble, connect and install system components; - Use stripping and crimping pliers, voltmeters, jigs, measurement instruments, hand and power tools; - Align major components; - Assist welders with prep, repair, and grinding weld spatter; - Mask locomotives for paint; - Utilize computer to access instructional documents. Essential and Physical Activities: - Strength – Must be able to lift and carry up to 35 lbs, push and pull up to 50 lb; - Motion – Constant walking Frequent and sustained bending, crouching, stopping, kneeing, squatting and overhead reaching and climbing ladders; - Vision/ Hearing Requirements – Must be able to follow written and verbal instructions and hear audible alarms; - Work Environment – Works on varied surfaces, concrete floors, and gravel, rail car and locomotive floors. Works at varied heights from floor level to tops of locomotives. Work in confined spaces. Non-temperature control environment, all weather conditions with high noise and high dust levels; - Emotional Demands – Due to the working environment, noise, dust, personal protective equipment, employee must be comfortable working alone; - Safety – Safety Sensitive positions because it works in and around active tracks, rail cars, locomotives, and other moving equipment. Employee must abide by all safety protocols, health/medical screenings and utilize all required PPE. Included but not limited to metatarsal boots, safety glasses, gloves, respirators, aprons, ear protection, etc. - High School Diploma or equivalent required. - Ability to read and interpret schematics, wire running lists, blueprints; - Ability to use various hand and power tools and measuring devices; - Ability to work in a Windows environment to look up assembly instructions/reference documents; - Safety- and quality-focused; - Continuous improvement-oriented.
search terms: Assembler+Mechanical
Local Job Bulletin is an independent Job Search Engine. Local Job Bulletin is not endorsed, sponsored or affiliated with the actual employer of the job. All trademarks, service marks, logos, domain names, and job descriptions are the property of their respective holder.
Assembler Job Openings: Earn $15-$45/Hr. Immediate Hire
Muncie
Upload your Resume - Let Employers find you!
Local Job Bulletin is an independent Job Search Engine. Local Job Bulletin is not an agent or representative and is not endorsed, sponsored or affiliated with any employer. Local Job Bulletin uses proprietary technology to keep the availability and accuracy of its job listings and their details. All trademarks, service marks, logos, domain names, job descriptions and other company descriptions / details are the property of their respective holder. Local Job Bulletin does not have its users apply for a job on the LocalJobBulletin.com website. Additionally, Local Job Bulletin may provide a list of third-party job listings that may not be affiliated with any employer. Please make sure you understand and agree to the website's Terms & Conditions and Privacy Policies you are applying on as they may differ from ours and are not in our control.;